Chapter 2 Installation Procedures
Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive
22
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Figure 11 Tabletop Parallel
SCSI Bus Termination Examples
Restarting the Tabletop
Drive System
After connecting the tabletop drive interface and AC power cables:
1
Set the tabletop LTO-4 (Model B) Half-Height Tape Drive power
switch to the on position.
2
Restart the workstation or server system.
3
Refer to the operating procedures in
chapter 3
to verify that the
tabletop LTO-4 (Model B) Half-Height Tape Drive comes on and
completes the Power On Self Test (POST) functions.
As required, proceed to either:
•
Installing the LTO Driver Software
•
Registering the LTO-4 (Model B) Half-Height Tape Drive
SCSI terminators
SCSI controller
(termination
enabled)
External SCSI
device
External tape drive
External SCSI device
External tape drive
SCSI controller
(termination disabled)
Internal SCSI
device (termination
enabled
Example 1: SCSI termination in a system
that has only external SCSI devices.
Example 2: SCSI termination in a system that
has both internal and external SCSI devices.
Summary of Contents for LTO-4 (Model B)
