Chapter 2 Installation Procedures
Installing the Internal LTO-4 (Model B) Half-Height Tape Drive
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
11
To disable terminator power, remove the termination power (TP) jumper
(see
figure 2
).
Note:
The internal parallel SCSI LTO-4 (Model B) Half-Height Tape
Drive does not provide SCSI termination. The last device at the
end of the parallel SCSI bus chain must have a SCSI bus
terminator.
Figure 3 Internal Parallel SCSI
Bus Termination Examples
Tape drive
(no termination)
SCSI device
(termination
disabled)
SCSI controller
(termination
enabled)
SCSI device
(termination
enabled)
Tape drive
(no termination)
SCSI controller
(termination
enabled)
SCSI terminator
SCSI terminator
Summary of Contents for LTO-4 (Model B)
