![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-8000/dlttape-dlt-8000_product-manual_3551923179.webp)
SCSI Commands
Quantum DLT 8000 Tape System
5-35
5.6
LOCATE Command (2Bh)
The LOCATE command is used to do high-speed positioning to the specified block
address.
The READ POSITION command can be used to obtain the block address, when writing,
when particular blocks of data (a data file, for example) are about to be written. The
LOCATE command can then be used to position the tape back at the same logical
position for high performance restore operations of particular blocks of data.
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (2Bh)
1
Logical Unit Number
Reserved
BT
CP
Immed
2
Reserved
3 - 6
(MSB)
Block Address
(LSB)
7
Reserved
8
Partition
9
Unused
Reserved
Flag
Link
Figure 5–14 LOCATE Command Descriptor Block — Data Format
Summary of Contents for DLTtape DLT 8000
