![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-8000/dlttape-dlt-8000_product-manual_3551923323.webp)
SCSI Commands
Quantum DLT 8000 Tape System
5-179
5.21 REPORT DENSITY SUPPORT Command (44h)
The REPORT DENSITY SUPPORT command is a 10-byte command used to request that
information about the densities supported by the logical unit be sent to the application
client. Note that a reservation conflict will occur when a REPORT DENSITY SUPPORT
command is received from any initiator other than the one holding a logical unit
reservation.
The figure below illustrates the format of the REPORT DENSITY SUPPORT command;
the table that follows explains the data fields of the command.
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (44h)
1
Reserved
Media
2 - 6
Reserved
7 – 8
(MSB)
Allocation Length
(LSB)
9
Unused
Reserved
Flag
Link
Figure 5–84 REPORT DENSITY SUPPORT Command Descriptor Block — Data Format
Summary of Contents for DLTtape DLT 8000
