![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-8000/dlttape-dlt-8000_product-manual_3551923245.webp)
SCSI Commands
Quantum DLT 8000 Tape System
5-101
Table 5–47 EEPROM Vendor Unique Page Parameters (continued)
Name
Value Rep.
Default
Length
(Bytes)
Usage
THIRDPARTYDEN
ASCII Decimal
0
1
Value of default third party density.
Requires ENATHIRDPARTYDENS = 1
ENAGRANULARITY
ASCII Binary
1
1
Enables granularity field in READ BLOCK
LIMITS command.
ENASCSIFILTER
ASCII Binary
1
1
Enables SCSI filter on SCSI chip.
ENAREQACKACTNEG
ASCII Binary
1
1
Enables active negation on REQ and ACK
signals
SETEOMATBOM
ASCII Binary
0
1
Sets EOM field in byte 2 of Request
Sense data when encountering BOM
SETEOMATEW
ASCII Binary
0
1
Sets EOM field in byte 2 of Request
Sense data when encountering Early
Warning end of media for all operations
REPUAONSEQUNLD
ASCII Binary
0
1
When set, the drive reports a Not Ready
to Ready Transition Unit Attention when
an autoloader loads the next cartridge
DISDEFERCLNRPT
ASCII Binary
0
1
When set, a cleaning report is sent over
the library port as soon as the cleaning
light illuminates. If this parameter = 0,
then the report is sent only at unload.
ENASCSIUNLONPMR
ASCII Binary
0
1
When set, enables a SCSI Unload when
a previous Prevent Media Removal
command is in effect
MAXBURSTSIZE
ASCII Binary
0080h
2
The value in this field specifies the
maximum amount of data to be
transferred without disconnecting. A
value of 0 sets no limit. This value is
given in 512 byte increments. For
example, a value of 8 indicates 4K bytes.
Values that are not multiples of 8 are
rounded up to the nearest multiple of 8.
Minimum value of this field is 0000h,
maximum is FFFFh.
SPEEDSETTING
ASCII Decimal
3
1
0 = Drive will match host bus speed
1 = Bus Speed Below 5.0 MB/sec
2 = Bus Speed 5.0 – 6.0 MB/sec
3 = Bus Speed of 6.0 MB/sec or more
NOTE: This information applies only
to DLT 8000 format.
TAMRIEDEFAULT
ASCII Binary
3
1
The value in this field is the value to be
set in the Tape Alert Mode Page (1Ch)
MRIE parameter. Minimum value is 0;
maximum value is 6.
Summary of Contents for DLTtape DLT 8000
