![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-8000/dlttape-dlt-8000_product-manual_3551923201.webp)
SCSI Commands
Quantum DLT 8000 Tape System
5-57
LOG SENSE Command (4Dh) (continued)
TAPE ALERT LOG PARAMETERS
Bit
Byte
7
6
5
4
3
2
1
0
5
n
–1
to
5
n
(MSB)
Parameter Code (
n
)
(LSB)
5
n
+ 1
DU
DS
TSD
ETC
TMC
Rsv’d
LP
5
n
+ 2
Parameter Length (1)
5
n
+ 3
Value of TapeAlert Flag (Flag is set when Bit 0 = 1; Bits 1 – 7 are Reserved)
Figure 5–25 Log Parameters Format for TapeAlert Page
Table 5–25 Log Parameter Field Descriptions for TapeAlert Page
Field Name
Description
Parameter Code
This field contains the Flag code. See Table 5-26 for the supported
Flags, level of severity, and the Flags’ definitions.
Parameter Length
This field is set to 1.
Value of Tape Alert Flag
If Bit 0 is set to 1, indicates that TapeAlert has sensed a problem. See
Table 5-26 for the supported Flags and their definitions. If Bit 0 is 0,
the Flag is not set and no problem has been sensed.
For definitions of bits that make up the Control Byte (the byte “5n + 1” above), refer to
Section 5.8.3, Table 5-21.
Summary of Contents for DLTtape DLT 8000
