SCSI Commands
5-56
Quantum DLT 8000 Tape System
LOG SENSE Command (4Dh) (continued)
5.8.5 TapeAlert Page (2Eh)
This page returns results of the tape drive’s on-going self diagnosis, so that the tape drive’s
behavior can be monitored and high reliability ensured. The TapeAlert page is read from the
tape drive at the beginning of each READ/WRITE activity, after any fatal errors occur during
a READ/WRITE, at the end of any tape cartridge when the READ/WRITE activity continues
onto another tape cartridge, and at the end of each READ/WRITE activity. The flags (Table
5–26) are set or cleared by the tape drive when the failure or corrective action occurs.
TAPE ALERT LOG PAGE HEADER
Bit
Byte
7
6
5
4
3
2
1
0
0
Page Code (2Eh)
1
Reserved
2 - 3
(MSB)
Page Length
(LSB)
Figure 5–24 TapeAlert LOG SENSE Header Format
Table 5–24 TapeAlert LOG SENSE Header Field Descriptions
Field Name
Description
Page Code
The Page Code echoes the page code that was specified in the LOG
SENSE command descriptor block.
Page Length
The Page Length field specifies the total number of bytes contained in
this log page, not including the four bytes that make up the header.
Summary of Contents for DLTtape DLT 8000
