![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-8000/dlttape-dlt-8000_product-manual_3551923180.webp)
SCSI Commands
5-36
Quantum DLT 8000 Tape System
LOCATE Command (2Bh) (continued)
Table 5–15 LOCATE Command Descriptor Block — Field Descriptions
Field Name
Description
BT
Block Type. The Block Type bit indicates how the Block Address field
is interpreted. The first recorded object (block or filemark) is at
address 0, and Block Addresses count both data blocks and filemarks.
CP
Change Partition. Since multiple partitions are not supported, this bit
must be set to 0.
Immed
Immediate. If this bit is set to 1, status is returned as soon as the
operation is started. If set to 0, status is returned after the operation
has completed.
Block Address
The Block Address field defines the SCSI Logical Block Address to
which the media will be positioned. These addresses start at address
0 and include data blocks and filemarks.
Partition
Not applicable (see
Change Partition
field above).
Summary of Contents for DLTtape DLT 8000
