Using System Tools
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 53
To ping or trace an IP address:
1. Enter an IP or host name in the
Device Name or IP Address
field.
2. Click
Ping
or
Trace Route
. The output appears in the Command Output window.
3. Click
Close
to return to the
Tools
page.
To perform a DNS lookup:
1. Enter a
Host Name or IP Address
.
2. Click
Lookup
. The output appears in the
Command Output
window.
3. Click
Close
to return to the
Tools
page.
To capture packets:
If a packet capture file exists, a note shows the date of the file and you can download it before you start a
new packet capture that overwrites the existing file.
1. Select an option from the
Select Network
list.
2. Click
Start
and then
Stop
when you want to stop packet capturing.
3. Click
Download File
to view or save the capture file.
You can activate packet capture and go to other WebUI application pages while the packet capture runs in
the background. However, the packet capture stops automatically if the WebUI session ends. Make sure
you return to the packet capture page, stop and download the capture result before you end the WebUI
session.
Note - The capture utility uses
tcpdump
tool. The Check Point "
fw monitor
" tool is available through the
command line interface.
Windows driver
When the mini-USB is used as a console connector, Windows does not automatically detect and download
the driver needed for serial communication. You must manually install the driver. For more information, see
To download the Windows driver for Mini-USB console socket:
Click the
Download
link.
Note - This page is available from the
Home
,
Device
, and
Logs & Monitoring
tabs.
