Setting the Management Mode
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 39
n
To connect to the Security Management Server now, select
Connect to the Security
Management Server now
, enter the Security Management Server IP or name and click
Connect
. When you successfully connect to the Security Management Server, the security
policy is automatically fetched and installed.
If the Security Management Server is deployed behind a 3rd party NAT device, select
Always
use this IP address
and manually enter the IP address the appliance used to reach the
Security Management Server. This IP address overrides, from this point on, the automatic
calculating mechanism that determines the routeable IP address of the Security Management
Server for each appliance.
If trust was established but the gateway could not fetch the policy, you can investigate the issue
with the Security Management Server administrator. When the issue is resolved, click the
Fetch Policy
button that shows instead of the
Connect
button.
n
To connect to the Security Management Server later, select
Connect to the Security
Management Server later
.
4. Click
Finish
.
To reinitialize trusted communication with the Security Management Server:
1. In the Security Management Server section, click
Advanced
to reinitialize trusted communication.
2. Click
Reinitialize Trusted Communication
.
A Warning message shows.
3. Click
Yes
.
Note - You need to coordinate this operation with the Security Management Server administrator, as
reinitialization is necessary on both sides.
Security Policy
To obtain the security policy from the Security Management Server, click
Fetch Policy
. This option is
available only if trust is established with the Security Management Server.
Internet
To test connectivity, click
Test Connection Status
. A status message shows the results of the test. You can
click
Settings
to configure Internet connections.
