Managing Active Devices
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 47
To revoke the Hotspot access:
1. Click the record for the relevant device.
2. Click
Revoke Hotspot Access
.
The access for that device is revoked. You must log in again through the Hotspot to reconnect the
device to the gateway.
Note - If there is no IPv6 activity in a dual stack host, the Active devices do not show the IPv6 address.
Note - This page is available from the
Home
and
Logs & Monitoring
tabs.
To add a new network object and bypass SSL inspection based on the host MAC address (locally
managed only):
1. Click the
Device Name
>
Save as
and select
Device type Network Object
.
2. For
Host MAC address
, enter a custom value or select from the menu.
3. Select the checkbox for
Bypass host with this MAC by SSL inspection
.
4. Enter the
Object name
.
5. Click
Apply
.
Note
- You can also do this from the
Users & Objects
>
Network Objects
page. Click
New
, and then for
Type
, select
Device
.
