
64
Interface is member in:
VLAN ID VLAN Name VLAN Type Egress rule
------- -------------------------------- ----------------- -----------
1 default Default Untagged
200 Marketing Static Tagged
300 Payroll Static Tagged
3.1.4.2.
Configuring the VLANs and Ports on Switch 2
Use the following steps to configure the VLANs and ports on Switch 2. Many of the procedures in this
section are the same as procedures used to configure Switch 1. For more information about specific
procedures, see the details and figures in the previous section.
To configure Switch 2:
1.
Create the Engineering, Marketing, and Payroll VLANs.
Although the Payroll hosts do not connect to this switch, traffic from the Payroll department must use Switch
2 to reach the rest of the network and Internet through the uplink port. For that reason, Switch 2 must be
aware of VLAN 300 so that traffic is not rejected by the trunk port.
2.
Configure ports 2-10 to participate in VLAN 200.
3.
Configure ports 11–30 to participate in VLAN 100.
4.
Configure Port-channel 1 to participate in VLAN 100 and VLAN 200.
5.
Configure port 1 and Port-channel 2 as participants in ports and add VLAN 100, VLAN 200, and VLAN 300
that accept and transit tagged frames only.
6.
Enable ingress filtering on port 1 and Port-channel 2.
7.
If desired, copy the running configuration to the startup configuration.
8.
View VLAN information for the switch and ports.
3.2.
Switchport Modes
You can configure each port on an QNOS switch to be in one of the following modes:
•
Access
— Access ports are intended to connect end-stations to the system, especially when the end-
stations are incapable of generating VLAN tags. Access ports support a single VLAN (the PVID). Packets
received untagged are processed as if they are tagged with the access port PVID. Packets received that are
tagged with the PVID are also processed. Packets received that are tagged with a VLAN other than the PVID
Summary of Contents for QuantaMesh QNOS5
Page 1: ...QuantaMesh Ethernet Switch Configuration Guide QNOS5 NOS Platform ...
Page 209: ...209 Table 7 8 IPv6 Neighbor Discovery Settings ...
Page 226: ...226 Table 8 2 L3 Multicast Defaults ...
Page 254: ...254 Appendix A Term and Acronyms Table 9 5 Terms and Acronyms ...