48
4.
Respond to the prompts to begin the file transfer.
The configuration file download procedures are very similar to the software image download procedures. For
more information about the prompts and how to respond, see “Load Code Update Package”.
2.3.1.4.
Select Serial Speed
Use option
4
to change the baud rate of the serial interface (console port) on the switch. When you select
option
4
, the following information displays:
1 - 1200
2 - 2400
3 - 4800
4 - 9600
5 - 19200
6 - 38400
7 - 57600
8 - 115200
9 - Exit without change
Select option (1-9):
To set the serial speed, enter the number that corresponds to the desired speed.
Note
: The selected baud rate takes effect immediately.
2.3.1.5.
Retrieve Error Log
Use option
5
to retrieve the error log that is stored in nonvolatile memory and upload it from the switch to
your ASCII terminal or administrative system. You can use any of the following methods to copy the error log
to the system:
TFTP
XMODEM
YMODEM
ZMODEM
Use the following procedures to upload the error log from the switch:
1.
From the Utility menu, select
5
and press ENTER.
Summary of Contents for QuantaMesh QNOS5
Page 1: ...QuantaMesh Ethernet Switch Configuration Guide QNOS5 NOS Platform ...
Page 209: ...209 Table 7 8 IPv6 Neighbor Discovery Settings ...
Page 226: ...226 Table 8 2 L3 Multicast Defaults ...
Page 254: ...254 Appendix A Term and Acronyms Table 9 5 Terms and Acronyms ...
