46
If you use TFTP to download the code, the switch must be connected to the network, and the code to
download must be located on the TFTP server.
When you use XMODEM, YMODEM, or ZMODEM to download the code, the code must be located on an
administrative system that has a console connection to the switch.
Use the following procedures to download an image to the switch by using TFTP:
1.
From the Utility menu, select
2
and press ENTER.
The switch creates a temporary directory and prompts you to select the download method:
Creating tmpfs filesystem on tmpfs for download...done.
Select Mode of Transfer (Press T/X/Y/Z for TFTP/XMODEM/YMODEM/ZMODEM) []:
2.
Enter
T
to download the image from a TFTP server to the switch.
3.
Enter the IP address of the TFTP server where the new image is located, for example:
Enter Server IP []:192.168.1.115
4.
Enter the desired IP address of the switch management interface, for example:
Enter Host IP []192.168.1.23
Note:
The switch uses the IP address, subnet mask, and default gateway information you specify for the
TFTP download process only. The switch automatically reboots after the process completes, and this
information is not saved.
5.
Enter the subnet mask associated with the management interface IP address or press ENTER to accept the
default value, which is 255.255.255.0.
6.
Optionally, enter the IP address of the default gateway for the switch management interface, for
example:
Enter Gateway IP []192.168.1.1
7.
Enter the filename, including the file path (if it is not in the TFTP root directory), of the image to
download, for example:
Enter Filename[]images/QNOS-ly8-5.4.00.00.stk
8.
Confirm the information you entered and enter
y
to allow the switch to contact the TFTP server.
After the download completes, you are prompted to reboot the switch. The switch loads the image during
the next boot cycle.
Use the following procedures to download an image to the switch by using XMODEM, YMODEM, or
ZMODEM.
1.
From the Utility menu, select
2
and press ENTER.
The switch creates a temporary directory and prompts you to select the download method:
Summary of Contents for QuantaMesh QNOS5
Page 1: ...QuantaMesh Ethernet Switch Configuration Guide QNOS5 NOS Platform ...
Page 209: ...209 Table 7 8 IPv6 Neighbor Discovery Settings ...
Page 226: ...226 Table 8 2 L3 Multicast Defaults ...
Page 254: ...254 Appendix A Term and Acronyms Table 9 5 Terms and Acronyms ...
