125
1.
Enter RADIUS dynamic authorization configuration mode:
(QCT) (config)#aaa server radius dynamic-author
2.
Configure the DAC. The server-key, if configured, overrides the global shared secret for this client only:
(QCT) (config-radius-da)#client 10.130.191.89 server-key 12345678
3.
Set the accepted authorization types (
{all | any | session-key}
) for dynamic RADIUS clients:
(QCT) (config-radius-da)#auth-type any
4.
Set the port on which to listen for CoA and disconnect requests:
(QCT) (config-radius-da)#port 4747
(QCT) (config-radius-da)#exit
5.
Set the network access server (NAS) IP address for the RADIUS server
(QCT) (config)#radius server attribute 4 10.130.65.4
6.
Specify a RADIUS server host and type (
{accounting | authentication}
):
(QCT) (config)#radius-server host auth 10.130.191.89
7.
Configure the server host:
(QCT) (config)#radius server key auth 10.130.191.89
Enter secret (64 characters max):********
Re-enter secret:********
Summary of Contents for QuantaMesh QNOS5
Page 1: ...QuantaMesh Ethernet Switch Configuration Guide QNOS5 NOS Platform ...
Page 209: ...209 Table 7 8 IPv6 Neighbor Discovery Settings ...
Page 226: ...226 Table 8 2 L3 Multicast Defaults ...
Page 254: ...254 Appendix A Term and Acronyms Table 9 5 Terms and Acronyms ...
