quadient IS-330 User Manual Download

Page: 8 / 184

Read this First

Safety Requirements

Power Connection

Before connection, check whether the Mailing System is suitable for the local AC

power voltage; refer to the type plates at the back of each system component.

•

Use an outlet located near the system that is easily accessible. As the power

supply cord is the system disconnecting device, do not route the power cord

between pieces of furniture or over sharp edges.

•

Avoid using outlets controlled by wall switches or shared by other equipment.

•

Make sure there is no strain on the power supply cord.

Compliance

Energy Star compliance

Your mailing machine is Energy Star compliant: it helps you to save energy and

money while protecting the environment.

1.2

Safety Requirements

THIS SYSTEM MUST BE GROUNDED

•

Only connect the power plug to an outlet provided with a pro-
tective ground contact.

•

To reduce the risk of fire, use only the power cord supplied with
the Mailing System.

•

Do not use ground adaptors.

•

Do not use this product on a wet floor or near water.

•

In case of liquid spillage, disconnect the power cord from the
outlet and proceed with cleaning.

Summary of Contents for IS-330

























































































































































































Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands

quadient IS-330, User Manual

Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands