manualshive.com logo in svg

quadient IS-330, User Manual

Share
Download
quadient IS-330 User Manual Download Page 160

Maintaining your Mailing System

157

10

Setting the Headset Alignment

Aligning the print heads is required if there is an  between the top and the bottom of

the imprints.

How to Align the Print Heads

How to Align 
the Print Heads

To align the print heads:

1

As supervisor (see 

How to Log in as Supervisor

 p.110):

2

Press [OK] and put a piece of paper in the mail transport.
The system prints a test pattern.

3

The 

Set headset alignment

  screen is displayed.

Check the printed pattern and use the up/down keys to select

the letter that corresponds to the straightest and complete

vertical line.

4

Press [OK] to validate.

5

Repeat the previous step until lines F  are aligned.

6

Press 

 to exit.

Your Mailing System requires the heads to be aligned after each 
cartridge change.

Press  

and 

type 

7.2.4

  or select the path:

> Maintenance > Ink Cartridge > Headset alignment

Summary of Contents for IS-330

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands