quadient IS-330 Page 64 User Manual Download

Page: 64 / 184

Money Operation

Adding Credit

You can add credit to your Mailing System at any time by complete the steps listed

below.
The Mailing System then connects to the Postal Services and validates the operation.

How to Add Credit to the PSD (Meter)

How to Add
Credit to the PSD
(Meter)

To add credit to the PSD:

Either:

Select > Credit (or type

If the system asks for a PIN code, enter the code using the
keypad and press [OK].
The

Credit

Screen is displayed.

By default, the system displays the value of the previous

transaction.

Enter the amount of postage to add using the keypad (use

to clear a digit, press

twice to clear the field).

Press [OK] to start the connection to the Postal Server.
If the crediting process is successful, the system displays a

successful message.

If crediting fails, the system displays a failure message and

the amount that you may actually add, depending on your

postal account balance.

Press

and type

or select the path:

> My Credit

In the case of a communication error, the amount previously
entered cannot be changed. Check connection settings (see
p.134).

Summary of Contents for IS-330

























































































































































































Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands

quadient IS-330, User Manual

Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands