quadient IS-330 User Manual Download

Page: 109 / 184

Online Services

106

System Online Services

Ink Management Service

The Ink Management service sends an electronic message to the Online Services

server when the mailing machine’s ink supply is running low.
An e-mail message then informs you of that condition so that the ink cartridge can be

replaced in time.

Rate Protection

Rate Protection ensures that the latest postal rates are installed on your Mailing

System.
When the Postal Service announce changes in their rate and fee schedule, the Online

Services server downloads the new rates into your Mailing System.
Your Mailing System automatically switches to the approved rates on the effective

date of rate change.

Account level

It is possible to increase the number of accounts in your system.

7.4

System Online Services

For more information, please contact Customer Service.

To upgrade your system, please contact your Customer Service.

Summary of Contents for IS-330

























































































































































































Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands

quadient IS-330, User Manual

Search results

Summary of Contents for IS-330

Reviews:

Related manuals for IS-330

Brands by name

Popular brands