quadient DS-77iQ Manual Download Page 12

Page: 12 / 156

The fold unit folds the documents. The following fold types are possible (see

Terminology

on page 147):

• No fold
• V-fold
• C-fold
• Z-fold
• Double V-fold

Envelope feeder (4)

Envelopes that are placed on a stack by the user, are fed one by one into the system by
the envelope feeder.

Inserter (5)

After the documents are folded, the documents are transported to the inserter. The inserter
inserts the documents into a waiting envelope. The inserter seals the envelope or not,
depending on the settings.

Stacker (6) (optional)

The documents inserted (or not) are transported to the stacker depending on the
programmed job. The stacker automatically stacks inserted documents.

Operating Controls

| Page 8 | Jul-11-2022 07:45 | Meet your Document System

English

Summary of Contents for DS-77iQ





























































































































































Search results

Summary of Contents for DS-77iQ

Reviews:

Related manuals for DS-77iQ

Brands by name

Popular brands

quadient DS-77iQ, Manual

Search results

Summary of Contents for DS-77iQ

Reviews:

Related manuals for DS-77iQ

Brands by name

Popular brands