quadient DS-77iQ, Manual

Page: 142 / 156

Adjust the envelope
insert fingers position
on page 45
Check fingers posi-
tion, adjust if needed. Fingers not correctly
adjusted. System stops while
inserting (stoppage at
the inserting point).
Editing a job on
page 55
Check fold settings. Inserted document
too long for used en-
velope.
Envelope Specifica-
tions
on page 143
Check envelope spe-
cifications. Envelope throat incor-
rect.
- Eliminate faulty envel-
opes. Envelope glued in-
side.
- Eliminate faulty envel-
opes. Window not glued
properly.
Filling the Sealing Li-
quid Reservoir
on
page 75
Check water level,
refill if needed. Water level low. Flap not sufficiently
moistened.
Clean and replace
brushes
on page 125
Check brushes, re-
place if needed by the
extra soaked set. Brushes dry.
Clean and replace
brushes
on page 125
Check brushes, clean
if needed. Brushes dirty.
Filling the Sealing Li-
quid Reservoir
on
page 75
Check the moistening
felt, refill water tray if
needed. Moistening felt dry.
Replace or clean
moistening cloth
on
page 126
Check the moistening
felt, clean if needed. Moistening felt dirty.
Clean and replace
brushes
on page 125
Replace brushes. Brushes worn out.
Replace or clean
moistening cloth
on
page 126
Replace moistening
felt. Moistening felt worn
out.
138
| Page 138 | Jul-11-2022 07:45 | Fault Finding
10
English