92
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
6.1.1.2 CLEANING VERSATILE FEEDER SENSORS
1.
Raise the Insert Head perspex top cover to access the first installed Versatile
Feeder station for sensor cleaning.
2. For subsequent installed feeder stations, open the Versatile Feeder side cover
as shown in Figure 6.14 to access from the side for sensor cleaning.
QTL-RND-OPS-00000153-A-00
Figure 6.14 – Opening the Versatile Feeder side cover
3. Clean the module exit sensors shown in Figure 6.15.
QTL-RND-OPS-00000154-A-00
Figure 6.15 – Cleaning the module exit sensors
4. Push the air-duster nozzle approximately 30mm inside the feed hopper shown
in Figure 6.16 and spray liberally to clean the sensors.
QTL-RND-OPS-00000155-A-00
Figure 6.16 – Cleaning the feed hopper sensors
Summary of Contents for DS-200iQ
