60
JUN 2020
USER GUIDE
5
OPERATOR INSTRUCTIONS
DS-200iQ / DS-600iQ
REV 00
5. To adjust the side guides, loosen the thumb screw knob as shown in Figure
5.7 and adjust the side guides by moving them inwards or outwards to an
approximate clearance of 1 - 2mm on each side of the document or enclosure.
QTL-RND-OPS-00000115-A-00
Figure 5.7 – Adjusting the Versatile Feeder hopper side guides
NOTE:
The guides move in unison when being adjusted, ensuring the documents or
enclosures being processed are fed through correctly and centred.
6. Re-tighten the thumb screw knob once the desired adjustments have been
made.
5.1.2.1 VERSATILE FEEDER SEPARATOR ADJUSTMENT
Take caution when setting the separator gap, as the metal separator shield tapes
indicated in Figure 5.8 may become damaged if the operator pulls a document out of
the hopper too aggressively.
QTL-RND-OPS-00000268-A-00
Figure 5.8 – Separator shield tapes
1. First, gently slide a document into the hopper feed gap so it initially just grips
the paper as shown in Figure 5.9.
QTL-RND-OPS-00000141-A-00
Figure 5.9 – Sliding a document into the hopper feed gap
Summary of Contents for DS-200iQ
