quadient DS-200iQ, User Manual, Page: 55 / 130

49
JUN 2020
USER GUIDE
4 OPERATOR IMOS SETTINGS DS-200iQ / DS-600iQ
REV 00
1. Select the ‘ Sort Criteria ’, and then the required ‘ Mail sort ’ associated with it.
2. Set the Mail sort priority required for each line as shown in Figure 4.22.
QTL-RND-SCR-00000081-A-00
Figure 4.22 – Mail sorting settings
NOTE:
The last Mail sort selected will be used by default when selecting the sort
criteria and the required mail sort associated with it.
Each Mail sort can have a number of combinations of criteria, some of which
may overlap, you can determine which has priority.
Figure 4.22 shows Weight Group 2 and Weight Group 3 both using Mail sort
2. It is possible to change the priority so that mail-pieces with Weight Group 3
have priority over those in Weight Group 2 instead of the existing priority.
3. To change the priority, select a ‘ priority number ’ to switch on the scroll arrows
as shown in Figure 4.23.
QTL-RND-SCR-00000082-A-00
Figure 4.23 – Changing the mail sort priority
4. Use the arrow to adjust the sort priority, then select the number again to
finalise the sort priority.
5. Press ‘ Next ’ once the desired Mail Sort settings have been made.