62
JUN 2020
USER GUIDE
5
OPERATOR INSTRUCTIONS
DS-200iQ / DS-600iQ
REV 00
5.1.3
LOADING THE FLEX FOLDER HOPPER
The Flex Folder is fitted with pods of one 1000-Sheet, or two 500-Sheet hoppers.
Paper orientation in the hoppers will depend upon the job requirement. For further
assistance in the various appliactions see section
and
5.1.3.4 Non-Reading Orientations
.
5.1.3.1
500-SHEET HOPPERS
1. Loosen the thumb screw knob as shown in Figure 5.12, and adjust the hopper
guides by moving them inwards or outwards to an approximate clearance of
1 - 2mm on each side of the paper.
QTL-RND-OPS-00000119-A-00
Figure 5.12 – Adjusting the 500-Sheet hopper guides
NOTE:
The guides move in unison when being adjusted, ensuring the paper/forms
being processed are fed through correctly and centred.
2. Load the 500-Sheet hopper, ensuring the stack of paper/forms stack are
pressed down and loaded fully forward and under the pick-up rollers as
shown in Figure 5.13.
QTL-RND-OPS-00000120-A-00
Figure 5.13 – Loading the 500-Sheet hopper
3. Re-tighten the thumb screw knob once the desired adjustments have been
made.
Summary of Contents for DS-200iQ
