90
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
7. Lift the Upper conveyor assembly (furthest from the envelope hopper) so it
locks into place as shown in Figure 6.6.
QTL-RND-OPS-00000146-A-00
Figure 6.6 – Raising the Upper conveyor assembly locking it into place
8. Clean the input conveyor sensors as shown in Figure 6.7.
QTL-RND-OPS-00000147-A-00
Figure 6.7 – Cleaning the input conveyor sensors
9. Lower the side cover, then lift the overguide inside the closer cavity and latch
it into place as shown in Figure 6.8.
QTL-RND-OPS-00000148-A-00
Figure 6.8 – Raising the overguide latching it into place
10. Clean the insertion area sensors below the overguide as shown in Figure 6.9.
QTL-RND-OPS-00000245-A-00
Figure 6.9 – Cleaning the insertion area sensors
Summary of Contents for DS-200iQ
