quadient DS-200iQ, User Manual, Page: 65 / 130

59
JUN 2020
USER GUIDE
5 OPERATOR INSTRUCTIONS DS-200iQ / DS-600iQ
REV 00
5.1.1.1 ENVELOPE SEPARATOR ADJUSTMENT
The separator prevents more than one envelope being fed at a time.
1. First open the Insert Head side cover.
2. To adjust the separator, turn the blue knob located below the envelope
conveyor as shown in Figure 5.5.
QTL-RND-OPS-00000113-A-00
Figure 5.5 – Adjusting the envelope separator
3. Slide a required envelope to be processed into the gap and turn the knob until
the separator will just grip the envelope:
▪ Clockwise - Decreases the gap
▪ Anticlockwise - Increases the gap
4. Close the Insert Head side cover once the desired adjustments have been
made.
5.1.2 LOADING THE VERSATILE FEEDER HOPPER
1. To load the Versatile Feeder hopper, first insert a single document or
enclosure into the hopper.
2. Loosen the backrest thumb screw knob, and then slide the backrest forwards
or backwards to an approximate clearance of 2-3mm from the trailing edge
of the document or enclosure as shown in Figure 5.6, to allow subsequent
feeds to full into the hopper pocket correctly.
QTL-RND-OPS-00000114-A-00
Figure 5.6 – Adjusting the Versatile Feeder backrest
NOTE:
Adjustments to the Versatile Feeder hopper side guides and separator gap
may be needed to suit the document or enclosure size being processed, see
section 5.1.2.1 Versatile Feeder Separator Adjustment .
3. Re-tighten the thumb screw knob once the desired adjustments have been
made.
4. Load the remaining documents or enclosures required for processing into the
hopper.