68
JUN 2020
USER GUIDE
5
OPERATOR INSTRUCTIONS
DS-200iQ / DS-600iQ
REV 00
5.1.3.5 ACCUMULATOR SIDE GUIDE ADJUSTMENT
If an Accumulator is fitted to the Flex Folder, the side guides will need to be adjusted
according to the paper/forms size being processed.
1. Loosen the thumb screw knob and adjust the accumulator guides by moving
them inwards or outwards.
2. Use the pre-set size markings as shown in Figure 5.20 to determine the correct
size and orientation of the paper/forms to be collated together before folding
as a group.
NOTE:
The side guide should just cover the indicator pre-set size markings.
QTL-RND-OPS-00000123-A-00
Figure 5.20 – Adjusting the Accumulator side guides
NOTE:
The guides move in unison when being adjusted, ensuring the paper/forms
being processed are fed through correctly and centred.
3. Re-tighten the thumb screw knob once the desired adjustment has been
made.
4. To empty any paper/forms in the accumulator, raise the overguide until it
locks up into place as shown in Figure 5.21.
QTL-RND-OPS-00000124-A-00
Figure 5.21 – Raising the Accumulator overguide
5. Once complete, press the lock latch inwards to release the overguide and
return it into position.
Summary of Contents for DS-200iQ
