103
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
6.3.2
VERSATILE FEEDER FEED TYRES
1. Unscrew and remove the three thumb screw knobs in the feed hopper as
indicated in Figure 6.41.
QTL-RND-OPS-00000175-A-00
Figure 6.41 – Unscrew and remove the three thumb screw knobs
2. Open the side guides to their widest extent.
3. Lift the feed bed plate out of the chassis to access the feed shaft rollers
beneath as shown in Figure 6.42.
QTL-RND-OPS-00000176-A-00
Figure 6.42 – Lift the feed bed plate out of the chassis
4. Slide the spring loaded collar on each end of the feed shaft roller assemblies
inwards to release the drive dog as shown in Figure 6.43.
QTL-RND-OPS-00000024-A-00
Figure 6.43 – Sliding the spring loaded collar to release the drive dog
Summary of Contents for DS-200iQ
