quadient DS-200iQ, User Manual, Page: 112 / 130

106
JUN 2020
USER GUIDE
6 OPERATOR MAINTENANCE DS-200iQ / DS-600iQ
REV 00
6.3.3.2 HOPPER 2, 3, AND 4 PICKUP ROLLERS
To access the feed pickup rollers for hoppers 2, 3, and 4, it is advisable to remove all
hoppers for ease of access, beginning with the lowermost subsequent hopper.
1. Slightly lift and gently pull out the hoppers as shown in Figure 6.49 to access
the feed pickup rollers for replacement.
QTL-RND-OPS-00000267-A-00
Figure 6.49 – Lifting out the hoppers
2. Follow the procedures set out in section 6.3.3 Flex Folder Pickup Rollers to
replace the feed pickup rollers.
3. Refit the removed hoppers once feed pickup roller replacement is complete.
6.4 MAINTAINING THE WETTER SYSTEM
The wetter system comprises of a tank which should be removed for cleaning at
regular intervals. The tank is replenished by a pump-driven reservoir bottle which will
need replacing when the sealing fluid has been depleted.
6.4.1 CLEANING THE WETTER TANK
1. Open the side cover of the Insert Head.
2. Using the blue tab as shown in Figure 6.50, lift the end of the wetter tank
slightly and withdraw it outwards.
QTL-RND-OPS-00000177-A-00
Figure 6.50 – Cleaning the wetter tank
3. Empty the tank and clean it by running clear water over it for a few minutes.
4. Replace the tank, which will then be replenished automatically by the reservoir
bottle.