16
INSTALLATION INSTRUCTIONS
S
T
U
V
20.
Connect the Auxiliary Release Switch (optional) and Auxiliary
Release Cables to the 2 empty slots on the 6 pin connector
attached to the Dash Control Wire Harness (
S
).
21. Reconnect main power source.
Make sure there are no open electrical connections.
22.
With
Vehicle OFF
, manually push in the Locking Pawl with a
screwdriver to lock the Docking System and Green Light on
Dash Control illuminates (
T
).
DO NOT use your fingers.
23.
With the
Vehicle OFF
, press the Release Button on the Dash
Control and Locking Pawl unlocks and Red Unlocked Icon
illuminates for 10 seconds (
U
).
If not installing the Auxiliary Release Switch proceed to
step 26.
24.
With
Vehicle OFF
, manually push in the Locking Pawl with a
screwdriver to lock the QLK-150 Wheelchair Docking System,
Green Light on Dash Control illuminates (
V
).
Connected Power Wires
Connected
Connected
Connected
Vehicle Off
Vehicle Off
On for 10 seconds
Vehicle Off
