22
INSTALLATION INSTRUCTIONS
RR
SS
TT
UU
49.
Place the Cover back onto the Manual Release Control by
clicking it into place (
RR
).
50.
Insert the Release Handle with the loop facing up through the
opening on the Cover and into the Socket on inner Frame.
Then tighten the Set Screw through the opening on the Cover
(
SS
).
Pulldown Release Handle
to release the wheelchair from
the Docking System.
Do NOT pulldown Release Handle while vehicle is in
motion, for it will release the wheelchair.
51. Or
insert the Release Handle with the loop facing down
through the opening on the Cover and into the Socket on
inner Frame. Then tighten the Set Screw through the opening
on the Cover (
TT
).
Pushdown Release Handle
to release the wheelchair from
the Docking System.
Do NOT pushdown Release Handle while vehicle is in
motion, for it will release the wheelchair.
52.
Remove the Retaining Ring from underneath the Docking
System, insert the other side of the Release Cable into the
cable slot and place back the Retaining Ring to secure the
Release Cable (
UU
).
