12
INSTALLING WHEELCHAIR INTERFACE
BRACKET AND V-GUIDE
Stabilizer required for driver application and
recommended for all other applications.
1.
Follow the installation instructions that come with the bracket.
This will vary depending on the wheelchair model.
2.
This illustration is a sample of an installed Wheelchair Interface
Bracket and V-Guide on a wheelchair (
A
).
Mark Location of QLK-150 Wheelchair
Docking System
Stabilizer required for driver application and
recommended for all other applications.
3.
Choose best location inside the vehicle for installing Docking
System and Stabilizer.
• Have the wheelchair occupant enter and exit vehicle several
times to make sure they have enough room to move and are
comfortable with the set up.
Wheelchair occupant MUST face forward in the vehicle
.
4.
Allow occupant to place the wheelchair into ideal forward facing
position and put the Docking System under the wheelchair for
positioning. The Locking Pawl on the Docking System should be
unlocked, if not push the Manual Release Lever to unlock it (
B
).
Inspect the underside of vehicle floor, note utilities,
frames, cross-members, fuel tanks and other possible
obstructions. If any obstructions are present make
adjustments or change the location of the Docking System
and Stabilizer with wheelchair occupant present.
5.
Move wheelchair forward and engage the 5/8” (15.88mm)
Docking Bolt into the Docking System (
C
).
Optional base mounts allows the QLK-150 Docking
System to be mounted from 1.5” (38mm) to 4” (100mm)
(D).
INSTALLATION INSTRUCTIONS
A
B
C
D
