6
POWER SUPPLY
• All equipment and components must be installed and serviced by an experienced and trained technician.
• 12 VDC at 10 Amps (Ignition)
• 12 VDC at 20 Amps (Vehicle’s Power)
ELECTRICAL REQUIREMENTS
SYSTEM CHECKLIST
KIT: Q04S150
❏
❏
Adhesive Dash Control (Driver’s Control)
❏
❏
QLK-150 Wheelchair Docking System
❏
❏
Electronic Control Module (ECM)
❏
❏
Auxiliary Release Switch (Occupant’s Switch)
– 3 Pin Wire Harness (Power, Ground and Ignition)
– 2 Auxiliary Release Cables
– 2 Connectors
❏
❏
2 Adhesive Wire Clips
❏
❏
Mounting Hardware Kit (Grade 8
)
• 6 – 4” (101.6mm) Washers
• 6 Lock Nuts
• 6 Washers
• 6 – 3/8” (9.53mm) Bolts
❏
❏
User Hangtag
– Installation Manual
– Use and Care Manual
– Warranty Card
