20
INSTALLATION INSTRUCTIONS
HH
JJ
KK
LL
41.
Install flexible Dash Control by peeling off adhesive film cover
(recommended) and pressing Dash Control firmly onto clean
surface area, dash panel or where previously determined by
the wheelchair occupant (
HH
).
The adhesive film on the Dash Control can take anywhere
between 24 to 48 hours before it permanently sticks onto
surface area, depending on the environment.
INSTALL AUXILIARY RELEASE SWITCH
(OPTIONAL)
42.
Connect the Connectors to the Auxiliary Release Cables with
a Crimping Tool. Then connect the Auxiliary Release Switch to
the Connectors. The Auxiliary Release Cables should already
be permanently connected to the 2 empty slots (Ground and
SW2) on the 6 pin connector attached to the Dash Control
Wire Harness (
JJ
).
43.
Install the Auxiliary Release Switch where previously
determined by the wheelchair occupant (
KK
).
INSTALL MANUAL RELEASE CONTROL
(OPTIONAL)
44.
Mount the Mounting Plate onto the chosen location with
provided screw (
LL
).
