manualshive.com logo in svg

QMS Magicolor WX, User Manual

Share
Download
QMS Magicolor WX User Manual Download Page 68

Configuring the 

Windows NT 4.0 

Printer Driver

QMS magicolor WX User’’'s Guide

2-28

Dark Picture

Negative

Black Ref. and White Ref.

Black Ref. and White Ref. work together.

Purpose

Adjusts images that are too dark.

Choices

Unchecked—Does not adjust image.

Checked—Lightens the colors in the image.

Default

Unchecked

Notes

Adjusting for overexposure can restore details lost due to a 
lack of contrast.

Purpose

Sets image to positive or negative.

Choices

Unchecked—Does not adjust Image.

Checked—Inverts the colors in the image.

Default

Unchecked

Notes

Setting the image to negative inverts the colors in the image.

Purpose

Sets the range between the darkest and lightest reference 
points in the image.

Range

Black Ref.—0.000 (less black) to 0.400 (more black)

White Ref.—0.600 (more white) to 1.000 (less white)

Default

Black Ref.—0.000

White Ref.—1.000

Notes

Increasing the value of the black reference point and 
decreasing the value of the white reference point increases 
contrast but narrows the range of midtones.

Summary of Contents for Magicolor WX

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands