manualshive.com logo in svg

QMS Magicolor WX, User Manual

Share
Download
QMS Magicolor WX User Manual Download Page 158

Cleaning the 

Printer

QMS magicolor WX User’’'s Guide

5-32

19 Insert the wire cleaner into the recess on the AC-charger 

unit, and slide the cleaner back and forth.

20 Clean the inside corners of the AC-charger unit with cotton 

swabs.

21 Reinstall the AC-charger.

Slide the left side of the charger into the slot before lowering the 
right side of the charger. Press the release latch outwards while 
seating the right side, then release the latch to secure the charger 
in place.

22 Replace the wire cleaner in the OPC belt cartridge.

23 Swing the three brass latches back over the charger unit to 

hold it in place.

24 Make sure the green handle on the end of the OPC belt car-

tridge is turned up (unlocked).

Summary of Contents for Magicolor WX

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands