) -
)!
tion is not made, you will not activate ColorSync, even
though the software is installed on your Macintosh.
5
You will have multiple choices for the Intent: pop-up menu. If
you are unsure of what to choose, leave this at the default
setting, Auto Selection or refer back to the ColorSync docu-
mentation that was included with your Macintosh.
6
In the Printer Profile: pop-up menu, you will need to select
magicolor 330 from the list of printers. If you do not see the
magicolor 330 listed, then you do not have the ICC profiles
installed correctly. With System 8.1, the ICC profiles are
stored in the System Folder inside a folder titled, “ColorSync
Profiles.”
7
You must be sure to deactivate the
magicolor 330's built-in
color matching if you intend to use ColorSync. As stated at
the beginning of this section, only one color management
system can be active at a time. Access Printer Specific from
the General pop-up menu in the print dialog box. Set ICC
Color Matching: to Disable.
QMS recommends using ColorSync since most of the popular graph-
ics applications on the market today support this method of color
matching, and ColorSync is recognized as the standard for color
matching on Macintosh computers.
&."
In addition to ColorSync, the
magicolor 330 supports ICC color
matching that is built into and performed on the printer. Printer resi-
dent matching is faster than host-based color matching (ColorSync)
since the calculations for color matching take place on the printer and
not the Macintosh.
To invoke the printer resident color matching you will need to perform
the following steps:
1
Make sure you've installed the
magicolor 330 PPD and you
have the
magicolor 330 ICC profiles installed correctly on
your Macintosh. If you have not, locate the
QMS Software
