!
)
..
'
!) ) .
= ) "
1
Turn the printer off and on again to produce a startup page.
2
Compare the serial port settings listed on the startup page to
those in your AUTOEXEC.BAT file.
3
Try the communication test again.
If a blank page ejects from the printer, the printer and the PC are
communicating. If a blank page doesn’t eject and you typed the file
correctly, refer to your DOS documentation for more information.
($ )5
&&
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1
Display a disk or folder window.
2
Set up page information.
a
From the File menu choose Page Setup.
b
Select paper size, orientation, and other necessary options.
c
Choose OK.
Select
Save changes.
IDLE
Online/
Offline
Put the printer back on line (the
Ready indicator lights).
IDLE
Press this
key...
to...
The message window
reads...
