!
&
)!,
$ '
There are three ways to enable/disable collation:
Use your application. (Check the documentation to see if your
application includes a specific procedure for collating pages.)
Select collation in the printer driver.
On a network, use CrownAdmin to select collation.
Configure the printer through the configuration menu.
()! !
,- & -
For a multiple-copy document with collation On, there must be
enough Display List memory to hold the display list blocks for all
pages in the collation range. (For more information on Display List
blocks, see “Display List” in chapter 5, “Additional Technical Informa-
tion,” in the
Reference manual.) If there’s not enough memory, then
a collation boundary is forced after the last compiled page of the
collation range.
!""
This mechanism of introducing a forced boundary—or breaking a
document down into several smaller, more manageable sets—is
known as chunk collation. For example, in the following illustration,
copies “a” and “b” of each set must be manually combined to create
Menu
Operator Control/Collation
Choices
On, Off
Default
Off
