+!-#
)!
4)56
There is a optional high-duty fuser oil roller to support high-duty print-
ing. You may need the high-duty oil roller for the following:
To print a higher number of pages per day
For increased performance with high-capacity, continuous
printing
»
Note:
The high-duty oil roller is rated at 20,000 pages with an
average duty cycle of 500 pages/day. If you print less that this, we
recommend that you use the standard oil roller.
Default
600 dpi or 1200 dpi—your printer’s default is the highest
resolution available for the amount of RAM installed in the
printer (see “Minimum System Memory Requirements” on
page 3-3 for more information).
Notes
Whenever possible, set the print resolution through your
application. If the print resolution can’t be set through the
application, you can set it through the configuration menu, the
printer driver, or QMS Document Option Commands (DOCs).
If you want the printer to use a lower default resolution when
you restore defaults, set this option to your choice (and make
any other necessary configuration settings), and then use the
Administration/Miscellaneous/Save Defaults menu to save
your custom defaults. See “Working with Custom
Configurations” in chapter 4, “Printer Configuration,” of the
Reference for more information.
In addition, after you lower the default resolution, you should
reconfigure the printer memory (Administration/Memory/Quick
Config menu) to distribute it better for that particular resolution.
For example, if you set the default resolution to 600 dpi when
your printer has enough memory to print at 1200 dpi, the frame
buffer remains configured for 1200 dpi, which means that
printer memory that could be better used somewhere else is
being wasted.
