QMS 1725 SLS, User Manual

Page: 95 / 328

Printer Engine
Features
2-61 Printer Configuration
Setting Toner Out Action
You can configure the printer to stop or to continue printing when a
TONER OUT
error message is displayed in the message window.
Setting Manual Feed Timeout
This option allows you to set the amount of time the printer waits for
paper to be inserted into the manual feed slot before it cancels the
job.
Setting the Letterhead Option
This option only appears if the duplexing unit is installed on the
printer. The letterhead option allows you to print both simplex and
duplex jobs on letterhead paper from the same input bin (cassette)
without having to sort the pages manually.
Menu Administration/Engine/Toner Out Act.
Choices Continue—Printing when a
TONER OUT
message displays.
Stop— No printing when a
TONER OUT
message displays.
Default Continue
Menu Administration/Engine/Man. Feed Timeout
Choices 00000 - 00300 seconds
Default 00060 seconds
Notes A value of 00000 sets the timeout to infinity
Menu Administration/Engine/Letterhead
Choices On, off
Default Off
Notes Letterhead paper must be loaded face down in the input bin
with the bottom edge inserted first into the printer. You may
notice a decrease in the printing speed depending on the mix
of simplex and duplex pages.