QMS 1725 SLS, User Manual

Page: 125 / 328

Cancelling/Endi
ng Print Jobs
3-23 Daily Operations
Ending a Print Job
If the first print job in the queue is waiting for, but not receiving the
data it needs to finish printing, the message window displays
WAITING FOR INPUT
END JOB?
Use the following procedure to end all print jobs in the queue that are
waiting for incoming data.
» Note: This procedure does not end a print job that is still receiving data. Its
only purpose is to provide an end-of-job indicator for a print job that does
not have one. You can identify an end-of-job indicator in the
Administration/Communications/Parallel and
Administration/Communications/Serial menu. (See chapter 2, “Printer
Configuration,” for more information).
The message window momentarily displays
RATE
IS SELECTED
(where
RATE
is the baud rate you selected) and then
SERIAL
BAUD RATE
3 If you want to change other settings, use the Next key to
scroll to the setting you want to change, then repeat the pro-
cedure described in steps 6 through 8. Otherwise press the
Online/Offline key.
The message window displays
Press this
key to... The message window
reads...
Cancel Access the Cancelling Job menu.
CANCELLING JOB?
YES
Next Advance to the End Job option.
CANCELLING JOB?
END JOB
Cancel
or Select Select End Job.
END JOB
IS SELECTED