10 – Performing Diagnostics
Running Diagnostic Tests
10-8
FS0054603-00 C
Q
10.3
Running Diagnostic Tests
Once you have set the test parameters as described in
section 10.2
, perform the
following steps to run the loopback or read/write buffer test:
1. Click the
Loopback Test
or
Read/Write Buffer Test
button.
2. The diagnostic tests warning displays. Do one of the following:
❑
Click
Yes
if there are no I/Os active and you want to proceed with the test.
❑
Click
No
to cancel the diagnostic test.
3. If you selected
Yes
in
step 2
, a dialog box displays with the data pattern
generated. Click
Stop
when you want to end the test.
NOTE:
An echo test is run instead of a loopback test under the following
conditions:
■
You have a QLA23
xx
HBA port that is connected to the fabric through
a point-to-point connection (F-port) or a QLA200 HBA.
■
The HBA is connected to a switch.
■
Your operating system has one of the driver versions listed in
table 10-1
.
Summary of Contents for SANsurfer FC HBA Manager Application
