Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 148 / 218

9 – Displaying Host, HBA, HBA Port, Device, and LUN Information
Displaying Device Information
9-14 FS0054603-00 C
Q
The identifying information displays:
❑
Hostname. The name or IP address of the host connected to the HBA
❑
HBA Model. The QLA200/QLA2 xxx HBA
❑
Port. HBA port number
❑
Node Name. World wide HBA node name
❑
Port Name. World wide HBA port name
❑
Port ID. Port ID of the HBA port
The link status information displays:
❑
Port Name. For the HBA port, the world wide HBA port name displays. For
each device, the world wide device port name displays.
❑
Diagnostic information. For the HBA port and each device, the number of
link failures, loss of sync failures, signal failures, and number of invalid CRCs
display.
3. You can do the following:
❑
Click Reset Current to initialize the link counter values to zero.
❑
Click Refresh Current to view the link counter values from when you
initialized them by clicking Reset Current .
❑
Click Refresh Total to view the link counter values from when the system
was last booted.
9.4
Displaying Device Information
You can view the following information about a device (disk or tape):
■
General device information (see section 9.4.1)
■
LUN list (see section 9.4.2)