Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 89 / 218

7 – Setting Up Connections
Configuring LUN Masking Using the LUN Masking Wizard
FS0054603-00 C 7-21
Q
7.3
Configuring LUN Masking Using the LUN Masking Wizard
Use the LUN Masking Wizard to set individual LUNs as masked or unmasked from
the operating system. Enabling a LUN sets the LUN as unmasked; disabling a LUN
sets the LUN as masked.
NOTE: You can also set individual LUNs as masked or unmasked by using the
LUN Configuration dialog box (see section 7.5.1.2) .
1. Start the LUN Masking Wizard. From the SANsurfer FC HBA Manager main
window HBA tree, right-click the host (or HBA, HBA port, device, or LUN
connected to the host). Do one of the following:
❑
On the SANsurfer FC HBA Manager main window Wizards menu, click LUN
Masking Wizard .
❑
From the pop-up menu, select LUN Masking Wizard .
❑
Press CTRL+L.
The Device Selection dialog box displays (see figure 7-10) .
Figure 7-10. Device Selection Dialog Box
NOTE: If you want to sort the existing entries in the table, click the column
heading. A triangle displays in the heading, indicating an ascending
sort (default). Click the triangle for a descending sort.