Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 95 / 218

7 – Setting Up Connections
Configuring Fibre Channel Devices
FS0054603-00 C 7-27
Q
7.4
Configuring Fibre Channel Devices
Perform the following steps to configure Fibre Channel devices:
1. From the SANsurfer FC HBA Manager main window, do the following:
a. In the HBA tree, select the host (or HBA, HBA port, device, or LUN connected
to the host).
b. Do one of the following:
❑
Click the Configure button on the toolbar.
❑
From the Host menu, click Configure .
❑
Right-click the host, HBA, HBA port, device, or LUN in the HBA tree. From
the pop-up menu, select
Configure .
❑
Press CTRL+C.
If SANsurfer FC HBA Manager detects an invalid configuration, the detected
invalid device and LUN configuration message displays. Click
OK ; auto
configure runs automatically.
Invalid configurations include:
❑
A device with contradictory visible paths. Only one path can be visible at a
time.
❑
A LUN with contradictory enabled paths. A configuration is valid when all
paths are enabled or disabled.
The Fibre Channel Port Configuration dialog box displays (see figure 7-15) .
Figure 7-15. Fibre Channel Port Configuration Dialog Box