Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 50 / 218

6 – Getting Started
Starting the SANsurfer FC HBA Manager GUI
6-2 FS0054603-00 C
Q
6.1.1
Starting SANsurfer FC HBA Manager on Windows 2000/
Windows Server 2003
On a Windows 2000/Windows Server 2003 system, do one of the following to start
the SANsurfer FC HBA Manager. When done, the SANsurfer FC HBA Manager
GUI displays
(see section 6.2) .
■
Double-click the SANsurfer icon on your desktop (if the icon was created during
installation) (see figure 6-1) . (If you have an older version of SANsurfer FC HBA
Manager and are upgrading to the current version, the old icon image displays.)
Figure 6-1. SANsurfer Icon
■
Click the Start button, point to Programs , point to QLogic Management Suite ,
and then click SANsurfer .
■
Click the Start button, click Run , and then do one of the following:
❑
Type in the name of SANsurfer (SANsurfer.EXE), including all the paths. Click
OK .
❑
Click Browse , then select the program after finding it in the Browse dialog
box. Click Open .
6.1.2
Starting SANsurfer on Red Hat/SuSE Linux or Solaris SPARC
On Red Hat/SuSE Linux and Solaris SPARC systems, perform the following steps
to start the SANsurfer FC HBA Manager. When done, the SANsurfer FC HBA
Manager GUI displays
(see section 6.2) .
1. Ensure that you are in a graphical user environment.
2. Open a command terminal.
3. Type
SANsurfer
and then press ENTER.