Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 166 / 218

11 – Updating the HBA
Updating the HBA Port Settings, Advanced HBA Port Settings, and Boot Device
11-2 FS0054603-00 C
Q
The Settings tabbed page displays parameters that are saved in NVRAM. These
settings configure Fibre Channel devices and the QLA200/QLA2 xxx HBA to which
they are attached (see figure 11-1) .
Figure 11-1. Settings Tabbed Page (HBA Port Settings) Sample
The identifying information displays:
■
Hostname. Name of the host connected to the HBA
■
HBA Model. The QLA200/QLA2 xxx HBA
■
Port. HBA port number
■
Node Name. World wide HBA node name
■
Port Name. World wide HBA port name
■
Port ID. Port ID of the HBA port
The bottom section displays one of three panels:
■
HBA Port Settings
■
Advanced HBA Port Settings
■
Boot Device Selection