Qlogic SANsurfer FC HBA Manager Application, User Manual, Page: 79 / 218

7 – Setting Up Connections
Configuring HBA Ports Using the General Configuration Wizard
FS0054603-00 C 7-11
Q
Do the following:
a. From the table, select the HBA port that you want to configure. You can
select only one HBA port.
NOTE: When you finish, you will be prompted whether you want to
configure another HBA port.
b. Do one of the following:
❑
Click Next to proceed.
❑
Click Cancel to exit the General Configuration Wizard without making
any changes.
❑
Click Help to display context-sensitive help.
2. If you clicked Next , the HBA Port Information dialog box displays (see
figure 7-4) .
Figure 7-4. HBA Port Information Dialog Box